Forging equipment is one of the basic industrial equipment, with a wide range of uses and long life. There are still many old equipment on the market. Many of our customers have purchased forging equipment that has been in continuous use for decades. We have witnessed the process of many customers starting from an air hammer and growing continuously. We have also experienced the golden age of "a sound of forging hammer is worth a lot of gold" with our customers. As everyone's environmental awareness becomes stronger and stronger, environmental protection requirements become higher and higher, and the demand for equipment renewal and transformation is also increasing. We have always provided services for the transformation and upgrading of forging equipment. Here we focus on the service of air hammer transformation to full hydraulic electro-hydraulic hammer.
.png)
The market holdings of air hammers are huge, most of which have been used for too long, and some are in a long-term idle state. The old air hammers are noisy and have heavy oil smoke. Due to long-term frequent use, wear and tear make the front and rear cylinder diameters larger, resulting in frequent breakage of the expansion ring, serious gas blowby, and poor hammer striking effect; some transmission system parts have large clearances, and parts need to be replaced frequently; some fuselages have cracks and cannot be used. These equipment often have intact foundations and anvils, and some fuselages are still very good. How to play a better role?
The old air hammer can be upgraded to an electro-hydraulic hammer.
Plan 1: Use the original air hammer foundation and anvil system + new fuselage and electro-hydraulic hammer hydraulic power system.
Plan 2: Use the original air hammer foundation, anvil system and fuselage + electro-hydraulic hammer hydraulic power system.
After the air hammer is transformed into an electro-hydraulic hammer, it can realize remote electric control striking and automatic continuous striking. The aviation operating handle and the operating machine can be operated on the same platform, which can not only save personnel but also greatly improve the efficiency of cooperation.
After the air hammer is transformed into an electro-hydraulic hammer, it can not only improve the striking energy, but also improve the overall performance and stability of the equipment, improve the working environment, use the foundation of the old air hammer, save the foundation construction cost, and save money by using the anvil part, so as to achieve cost reduction and efficiency improvement for the enterprise, as well as increase production capacity.
.png)
.png)
.png)
.png)
.png)
